Deluxe Child Bike Carrier, Seats one Kid Ages 1+, Frame Mount, Adjustable Safety Harness, Quick Release Design, Comfortable Padding, Rear-Mounted Child Bike Seat for Toddler

This was a good buy. It was easy to install and looked good on my husband’s bike. It is durable and stable. My daughter is 11 months and she fit pretty good in it even though she is on the smaller side. It looks like she will be able to fit in this for the next couple of years. We took a 2-3 hour ride and she was so comfortable she fell asleep for most of it. There are straps that go across the footing area so that it prevents your kid from kicking you. The straps are durable that I didn’t have to worry about her toppling out.

This seat is above what I expected, and the default product description just doesn't do it justice. I had previously tried a child seat from Bell, which required attaching to the seat post clamp with a bolt that was too large to fit. There was no adapter, so I had to return it. Everything was in pieces and it took me an hour to put it together and then take it back apart. This one was the complete opposite and so much better! Here are the features, and many of which aren't listed in the product description: - There are two main parts: the plastic seat and a steel rack, which you'll need to attach to your bike. Each comes pre-assembled! - The seat has a foam back-reset and a air-cushion seat padding, y-straps for the shoulders, and ankle straps. My 21 mo daughter was able to pull her feet out when she really wanted to, but they do keep her feet in most of the time. There's also the horizontal bar that swings up when you need to get your child in/out. The blue foot stirrups also adjust up/down. This was all together out of the box and adjusting does not need tools. - The steel rack attaches to your bike in three places: around each seat stay and around your seat post. You will need either a 10 mm wrench or a crescent wrench to tighten the nuts. These are also pre-assembled! - The seat attaches to the rack by sliding it on from the back. You then fold down a clamp and screw into place with a hand-tighten child-proof screw cap. It's the big orange cap between the child's legs. It works like a medicine bottle top (push down to turn). There's also a large plastic orange retainer pin that slides through the rack and seat once both are in place to prevent the seat from sliding back. That pin is held in place with a cotter pin. You can see the ring of that pin just peaking out under the seat in the product picture. - Last, there's an option head rest/extension that you can screw onto the back of the seat. It provides an extra ~8 in of head rest above the seat back and uses three screws to hold it in place. These are included. This took about 15 min to assemble and I really like that I can remove the seat if I want to ride around with just the rack on the bike. To do that you don't need tools. Just unscrew the safety cap and pull out the large plastic pin under the seat. The seat then slides off the rack. Once we assembled the seat, the three of us took a ride to the local park. Our daughter promptly had a mini-meltdown within 10 min at the park, but once she calmed down the rides there and back were great, she loved it! Toddler Tyrant strikes again!

i'd give it 4.5 stars but that's ok. the seat is a decent design. nice quality. velcro was placed haphazardly on the underside of the seat so it doesn't line up very well with the mating sides on the seat itself, but it still sticks. no biggie. i am riding a three speed Jamis Earth Cruiser with full fenders, a giant Cloud 9 seat and extended seat post. i have put a massive amount of miles on this bike over the past decade or so. the brackets fit fine but it took a bit of finagling to get it all to mount evenly, etc. i am not sure how well this would fit on a smaller bike with fenders and a lower seat height. i'm a giant dude with a giant bike and imo this bracket system barely fits. i had to remove my rear seat post-mounted reflector to make room. i'm pretty handy and this was not the easiest installation to get it right and even. could be the bike and all the stuff in the way, i know. fitment of the plastic seat to the bracket base is not tight. it's SAFE, but not tight. that means....A TON OF RATTLES WHEN NO CHILD IS IN THE SEAT. and i ride this bike a lot w/o my son so that is just unacceptable for me. so, i figured out the rattling points. they are: - the seat bottom on the brackets - the blue foot cups in footwells of the seat - the front of the bracket "tray" captured in the part of the seat with the red knob my solutions for all of this were to place zip ties, one on each side, cinched down around part of the bracket and the seat underneath the gray cushion. that pulls the seat tight to the bracket. then i flush cut the zip tie ends after cinching hard, so they don't cut the cushion when you replace it. i had to remove the red cross key thing to do this but i was able to re-attach it once i had the zip ties tightened. i placed 1/4" foam seal tape on strategic points on the blue foot cups where they rub/tap the gray footwells of the seat. you'll see. i put the adhesive side on the blue foot cups so the foam will always be in contact with the gray plastic no matter where the blue cup is mounted. i placed folded paper towel pieces along the black bar that is captured by the front piece with the red knob then closed it and tightened the red knob. also, when baby isn't in there, i make it so the harness straps are running outside of the cross bar/grab bar and tighten them. i ride on some rough roads and have Vermin knobby tires and without baby, all of these mods have calmed down like 95% of the rattles. it's very tolerable now. my son likes the seat. there is no way i can get the spoke protector mounted but that is fine because his feet can't get to the spokes because of the seat height and fender.

This is our second bike carrier from Schwinn. Years and years ago we purchased for our children, and now we are buying for our grandchildren. This is a very good product. First, it is easy to assemble right out of the box. The price is great for this kind of product. Our first grandchild used this for about three years as he was on the smaller size, but worked well. Our second grandson was much bigger. He would have loved to ride in this for many years, but by the time he was 2.5 he out grew this. Child must be at least a year old and have good head control. We always used helmets and that is where some of our negative comments come from. The old seats were a little more contoured to accommodate the helmets. This one, if you have a taller child, does not have the space for helmet, and head is just a tad tilted forward. Also, the foot area is too narrow. Its works, but personally feel if a bit wider would accommodate wider feet better. But, it is very sturdy and always felt safe with my babies. Attaching to bicycle can be a little confusing as the bracket to attach is very alignment specific. Always use as directed because like anything it could come loose. I will be using with more grandchildren as it is great to get them out and about safely attached to me.

This is the best addition to our bike rides! My toddler is 2 years old and is about 30 lbs. He fits perfectly in this bike seat and it’s so easy to put him in and out of it. It was easy to put together and add to my bike. Definitely recommend!

Schwinn chair for schwinn bike - what could be better? Fits perfectly. Sturdy and durable, comfortable for my kid. Nice quality, easy assembly. The great plus that the chair comes with the base and can be easily removed from the base with 2 moves. Love it

I bought this for my 4 year old. She doesn't know how to ride her own bike yet and we love to go on family rides together so we ordered this to bring her with us. She absolutely loves it. She is able to see all around and feels safe in it. We did have an accident where the bike tipped over with her inside and this thing nestled her in so well she never touched the ground just the side of the seat did. It's very durable and the weight isn't bad at all. It sits a bit close to the rider's seat so her knees hit my bum sometimes, but that is also because she is starting to outgrow it. The design is perfect because the holes in the back keep her from getting to hot too. I will warn that it can be a bit tricky to install and tighten the screws properly. It's easier with someone else helping, but can be done solo. Just be patient with it and play with it until you get it where you want it. I would definitely recommend this for anyone wanting to big their little ones for a ride.

Spoiler alert this carrier is discontinued and no parts are available for replacement per Schwinn customer service; referred back to Amazon to return and refund. But if you are comfortable with how things are and the necessary safety points operate accordingly then proceed with caution and know its not worth the value of money especially if parts are missing and could jeopardized safety. This was an item fairly easy to assemble and attach to an early 80s GT Force road bike. You will need an adjustable wrench and a screwdriver. However the box was missing the crossbar or handrail...extra work to hunt it down and possibly pay extra when it was suppose to be included. Night riding is not promoted with a child in a carrier but in the event, there is only one reflector. Its a necessity to add a rear red light, white front light, tire reflectors, brilliant stricker reflectors, and at least one mirror. The spoke guard design is okay but would have been best if better explained and taken a little more time on. I will adjust it later to see if there is a better option to close more gaps with the four ties provided. The carrier fits comfortable, straps are adjustable but not for child who can unbuckle their self. The seat cusion is thick but had velcro straps on buttom that were adhere to plastic bag it was packaged in which was challenging and difficult to remove to properly adhere to the seat of the carrier. The overall carrier provides stability and is an enjoyment.

I must say, this bike seat for children is one of the best things I've bought in a long time! I purchased it last August and used it every day during the summer to pick up my 3-year-old daughter from daycare. The route to daycare is almost 7km long, so I was biking almost 14km per day! But the bike seat made it so much easier and more enjoyable for both me and my daughter. She loves it and it's a great way to spend more time with her. The seat feels really secure and I don't have to constantly look back to check if she's okay. She weighs almost 14kg and the straps fit her great. The installation of the rack took around 30 minutes and it fits perfectly on my 2021 Trek FX2. I don't use the rack for anything else, but it's nice to know that there are compatible accessories from different brands if I ever want to carry things on my bike. Removing and attaching the seat is also a breeze, taking only around 2 minutes. I usually remove it on weekends when I want to bike by myself, but it's so easy to put back on that it's not a hassle at all. I also love that the seat is easy to clean and it still looks great after months of use. Overall, this bike seat for children was the best purchase I made in 2022. It's a game-changer for biking with my daughter and I can't wait for the warmer weather so we can start using it again!

Me encantó la silla, es cómoda y resistente. Fue medianamente fácil de instalar. Me gusta que se puede quitar con relativa facilidad, para no llevarla todo el tiempo contigo. A mí hijo le encantaaaa, ama sus paseos en bici. Me gusta que tiene seguro para los pies también. Y protección de la llanta. No me encanta el manubrio (el reposa manos?) pues su seguro se ve frágil, siento que se va a romper en algún momento. Lo bueno es que tiene cinturón. Ojo si se te duerme el peque en el trayecto, no es nada cómodo, la cabeza se les va mucho para adelante y puede pegar en el reposamanos.

Takes a bit of effort to mount, but all good. Love it!

Tiene una buena calidad y viene con todo lo necesario para instalarlo en la bicicleta

Good quality kid's carrier, easy to install, quick attach/detach. Once the base is mounted on one bike, it'll take 5 minutes to attach it to another. Base can be used as cargo mount as well with appropriate bags or box. Happy with purchase, kids like it too.